New 19.5 km Record Distance Wireless Path for ELVA-1 70/80 GHz 10 Gbps Radio Link

In April, 2020 10Gbps E-band radio was successfully tested on longest in the industry wireless path of 19,482 m (12.1 miles). This is the first independently confirmed case of 12+ miles range for commercially available 10G radio operated in 71-76/81-86 GHz frequency spectrum (E-band).

sergbeNew 19.5 km Record Distance Wireless Path for ELVA-1 70/80 GHz 10 Gbps Radio Link
read more

For Base Stations Synchronization — SyncE and PoE are in 10-gigabit PPC-10G radios

Synchronous Ethernet (SyncE) feature in millimeter wave links allows mobile operators to connect LTE and 5G base stations over the radio using this type of synchronization in their networks. Implementation of SyncE in ELVA-1 10-gigabit PPC-10G radios expands the possibilities for using PPC-10G to synchronize base stations within mobile network worldwide.

Synchronization is a key factor for the functioning of communication systems, and it is especially critical for LTE and 5G standards. The transmission of massive multimedia traffic, such as digitized voice and video, requires minimal transmission delays. In turn, for minimal data buffering in each node of the mobile communication network, it is necessary that these nodes are tightly synchronized with a reference master oscillator.

Today there are four of the most common base station synchronization options:

1. Via the GPS module as part of the base station.

2. From the operator’s core TDM network.

3. Using the IEEE 1588v2 packet network (implemented in the PPC-10G since 2017).

4. Using the SyncE packet network (implemented in the PPC-10G since Sept. 2019).

In recent years, mobile operators have relied on satellite-based synchronization of base stations as the most time-tested working solution. Moreover, for base stations operating via the radio channel “in countryside”, i.e. out of fiber connectivity to core TDM network, synchronization was almost always carried out through the GPS module. However, a significant increase in the total number of base stations connected via the radio channel, and location in places of poor GPS signal, required the use of alternative synchronization methods (like options #3 and #4).

Earlier, the synchronization functionality available in the PPC-10G radios by IEEE 1588v2 did not fully satisfy mobile operators. The fact is that according to the IEEE 1588v2 standard, the transmission of frequency and phase information is implemented at the software level. This means the quality of synchronization could be unstable and it depends on the real-time network load.

Synchronous Ethernet (SyncE) solves the problem of transmitting synchronization signals in a packet network at the physical level, and does so with high accuracy. A network based on PPC-10G with the SyncE feature can be used to distribute clock (frequency) synchronization signals for the operation of base stations. SyncE is currently available for PPC-10G-L2 radio with integrated 10GE 4-port L2+ switch.

SyncE is now available for PPC-10G-L2 radio with integrated 10GE 4-port L2+ switch.

Another important feature embedded in the PPC-10G equipment is the ability of PoE (Power over Ethernet). This technology allows to transfer electrical energy to radio equipment along with data through a standard twisted pair cable in Ethernet network. Usually it is for conditions where it is difficult to lay a separate electric cable (DC voltage) from the power supply to the radio.

sergbeFor Base Stations Synchronization — SyncE and PoE are in 10-gigabit PPC-10G radios
read more

40 Gbps Wireless World Record for E-band Communications at a Distance of 11 km Over Yenisei River on Polar Circle

First time in the industry, commercial 40 Gbps wireless channel was deployed at unprecedented distance of 11 km (~7 miles) in Igarka city, Siberia. The channel has 72 μs latency and is built on doubled PPC-10G-E/2+0 E-band radios for Norilsk Nickel (MCX: GMKN).

DOK Ltd, ELVA’s manufacturing partner in Russia today has reported on their website about deployment of 40 Gbps radio channel across the Yenisei River as wireless backup of Norilsk Nickel’s 40GE fiber channel backhaul. This cross-country 956 km fiber backhaul was laid through Russian Arctic regions to Norilsk city. The fiber has 40 Gbps bandwidth similar to installed radiolink and is intended for the operation of the Norilsk Nickel Group enterprises, local mobile operators, and state and municipal services.

This installation of E-band radios was done by DOK Ltd engineers jointly with specialists of Edinstvo Ltd, a subsidiary of Norilsky Nickel, who is responsible for the telecommunications of the holding. This project is a significant technological achievement and it marks the world record for combining ultra-gigabit overall bandwidth of the E-band radio communications with the unprecedented distance range.

In fact, 40 Gbps wireless channel is a new technology that has a proven potential for developing telecommunications infrastructure of large businesses.

A particularly difficult section of Norilsk Nickel’s fiber backhaul is considered to be the pass of the cable at the bottom of Yenisei River. Extraordinary climate conditions of the Polar Circle make it impossible to repair the fiber cable under the iced waters for much of the year. In this regard, Edinstvo Ltd has decided to build a backup wireless channel with a capacity of 40 Gbps over the Yenisei River.

The points of deployment of 40 Gbps wireless channel were done at antenna masts in Igarka and Priluki cities, located on different banks of the Yenisei river at a distance of 11 km. There were used two paired radio bridges of the PPC-10G-E-HP / 2+0 model. These are four parallel independent 10 Gbps radio channels aggregated into total capacity of 40 Gbps. Such scheme provides increased reliability of the wireless channel, as each 10 Gbps transceiver has an independent connection to power supply and external network equipment.

Max latency measured at 11 km distance was 72 microseconds. These numbers show that E-band radios can bring the data capacity and latency needs of 5G networks as well.

Pavel Vadov, Technical Director of Edinstvo Ltd, said, “We have studied the product lines of Russian and global brands of 10GE radio links looking for equipment which could work at wireless distance of 11 km. Only PPC-10G-E-HP radio presented by DOK has satisfied us. After few months of testing of one pilot 10 Gbps radio, we were assured that this radiolink is what we exactly need. At the present time, the radio channel with up to 40 Gbps capacity has been put into commercial operation”.

With this project, it was confirmed that 70/80 GHz E-band 10GE radio links could be successfully used for replacement or as a backup for any hi-end fiber backhaul. There are many territories in the world  where the laying of fiber optic links is complicated and costs a lot of money. As an alternative to fiber or as a backup line, the 70/80 GHz PPC radios provide short deployment time at an affordable cost.

PPC-10G-E-HP / 2+0 operates in the frequency range 70/80 GHz and has two independent 10 Gigabit Ethernet channels. Two PPC-10G-E-HP / 2 + 0 radio bridges with various center frequency and cross-polarization of the signal allows to get 40 Gbps aggregate total bandwidth.


About ELVA-1

Founded in 1993, ELVA -1 has facilities in Estonia and contracted manufacturing in St.Petersburg, Russia. Since 1993 the company has designed and manufactured millimetre wave equipment for communications and scientific sectors. For the past decade ELVA-1 has concentrated on designing high quality communications point-to-point radios, this has culminated in the release of the PPC-10G, the world’s longest range commercially available 10+ Gigabit radio. Company website for telecom products



PJSC «MMC NORILSK NICKEL» is a diversified mining and metallurgical company, the world’s largest producer of refined nickel and palladium and a leading producer of platinum, cobalt, copper and rhodium. The company also produces gold, silver, iridium, selenium, ruthenium and tellurium.

The production units of «NORILSK NICKEL» Group are located at the Norilsk Industrial District, on the Kola Peninsula and Chita region in Russia as well as in Finland and South Africa. PJSC «MMC «NORILSK NICKEL» shares are listed on the Moscow and Saint-Petersburg Stock Exchanges. PJSC «MMC «NORILSK NICKEL» ADRs trade over the counter in the US and on the London and Berlin Stock Exchanges. Company website

On photos:  PPC-10G-E/2+0 20 Gbps radios on tower in Siberia

left radio 20gbps in igarka

sergbe40 Gbps Wireless World Record for E-band Communications at a Distance of 11 km Over Yenisei River on Polar Circle
read more

DOK Ltd, ELVA’s Manufacturing Partner in Russia Was Selected as Mass-Quantity Supplier for MTS Mobile Operator

Russian Digital Economy National Project will bring 10GE Internet connection to B2G clients. These are socially significant bodies as local hospitals, schools, social security services all over Russia, and mostly in small cities and rural regions. Significant part of these connections will be 10GE wireless, while other ones by fiber.

Based on the results of the MTS tender, DOK company (St. Petersburg, RU) was selected as the supplier, which manufactures PPC-10G-E broadband 10 Gbps PPC radio links. This PPC model operates in the frequency range of 70/80 GHz, for which the Russian State Commission for Radio Frequencies (SCRF) has allowed in Russia a simplified notification procedure for registering radio links.

The PPC-10G-E radios are designed for 5G / 4G + / LTE wireless backhaul for mobile communications, Safe City/Smart City projects, wireless Internet access to large residential areas in urban and rural areas, industrial and transport enterprises in industrial and business parks.

Specialists of MTS PJSC mobile operator are already familiar with the PPC-10G-E radios. In 2017, pilot PPC-10G-E radio was participated in comparative tests of domestic and global brands of 10 Gbps radios conducted by MTS PJSC in the Leningrad Region, Russia. At these tests, PPC-10G-E radio has bitten many global brands while providing 10 Gbps data transfer rate and reliable operation at a distance of over 8 km.

sergbeDOK Ltd, ELVA’s Manufacturing Partner in Russia Was Selected as Mass-Quantity Supplier for MTS Mobile Operator
read more

Free Test of PPC-10G-E-HP for 20 km World Record Distance

Is 20 km distance range for E-band radios real?
Yes! ELVA-1 invites telecom operators worldwide to establish World record 10 Gbps for 20 km!

We’ll provide PPC-10G-E-HP 10Gbps 70/80 GHz radio link for free public testing on operator’s network at the distance from 15 to 20 km (9 to 12 miles).

sergbeFree Test of PPC-10G-E-HP for 20 km World Record Distance
read more

PPC-10G Upgraded to 17 dBm Tx power in QAM-128 @ 70/80 GHz band

Our continuous pursuit of engineering excellence has produced an upgrade to PPC-10G radio links that enables the world’s longest 10 Gbps path range in the 70/80 GHz band. Transmit (Tx) power of our basic model is now 17 dBm (50 mW) in QAM 128 mode.

sergbePPC-10G Upgraded to 17 dBm Tx power in QAM-128 @ 70/80 GHz band
read more